Simplicity 1695307 Návod k obsluze stáhnout pdf (Strana 21)

RegularMaintenance

MAINTENANCE SCHEDULE

Maintenance Required

Check auger gear case lubrication.**

Lubricate snowth rower.

Check tire pressure.

Change engine oil.*+

Clean or replace spark plug.+

Check drive linkage / belt tension.

Lubricate axle shafts.

Check / lubricate free-hand linkage.

Lubricate auger shaft.***

* Change original oil after two hours of operation.

** Check oil level each fall and spring.

4-See your engine Owner's Manual.

***Lubricate each fall and spring.

Frequency Notes

Benalene 900

25 Hours Grease

10 Hours 10W Oil and Grease

Monthly 20 psi (1,37 bar)

50 Hours / Yearly See Engine Manual

Yearly See Engine Manual

4-6 Hours N/A

Yearly Lithium Grease

10 Hours 10W Oil

10 Hours Lithium Grease

CHECKING TIRE PRESSURE

The air pressure in each tire (Figure 10) should be equal

for both tires for best performance. Be sure to keep caps

on valves to prevent entry of debris into the valve stem

when tires are filled.

Size PSI bar

15 x 5.0-6 20 1,38

4.80-8 20 1,38

16 x 6.5-8 14 ,96

AUGER GEAR CASE LUBRICATION

1. Place the snowthrower on a level surface.

2. Remove the pipe plug (A, Figure 11).

3. Check the lubricant level. It should be level with the

lower edge of the plug opening. If not, add the

Benalene 900 grease (available from your dealer).

4. Re-install pipe plug, and tighten securely.

Figure 10. Checking Tire Pressure

Figure 11. Auger Lubrication

A. Pipe Plug

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Komentáře k této Příručce

Žádné komentáře

Simplicity 1695307 Návod k obsluze Strana 21

Komentáře k této Příručce

Související produkty a manuály pro Sněhové frézy Simplicity 1695307